Cinima Laser Harp

The laser harp show is a very unique captivating audio visual experience. A typical show is around 5-8 minutes, but can go up to 15 minutes.

High energy electronic music performance, centered around the visually captivating Laser Harp instrument, with additional instrument, live visuals and atmosphere laser add-on options.

(Please note that for smaller local shows, we can provider sound and hazer and be self contained)
• Minimum stage size of 8’ wide X 8’ deep.
• Fog/Haze is necessary for the performance. It will be used before the show to build up haze and for the duration of the performance. Levels of haze must meet the act’s requirements. This may require shutting down AC units for performance time.
• When venue/client is providing hazer, it must be professional level, such as a Antari F4 or better. Please provide at least 2 hazers in case one malfunctions. Without haze, you cannot see lasers at all.
• Near complete darkness required. No overhead light, no back lighting, no LED wall behind laser area and no lights pointing directly at the performance area.
• No guests can be behind the laser or able to get within 6 feet of the lasers during performance. If not on a stage, stanchions or barrier much be placed around performance area to prevent guests from tripping on cables and from getting too close to the lasers.
• Power circuits must be run to performance area prior to Laser Act arrival. Will need 2 separate power circuits per laser harp. For each harp we will need to plug in: Circuit 1: 1 laser and computer, Circuit 2: hazers and/or foggers. All can be plugged into standard Edison 110V US power outlets. Hazers and foggers need separate circuit from lasers because they draw a lot of power when activated. NOTE: If power connection is not run prior to team arrival, this may result in longer set up time needed.
• Once lasers are set up and zoned they must remain in place.
• A full range PA system proportional to the size of the audience
• 2 DI boxes for backtrack and laser harp (quarter inch inputs)
• 2 laptop stands OR a counter height DJ table no less than 36” tall with minimum 36” X 24” table top surface.
• We require 1.5-2 hours to assemble, run cables in performance area, zone the lasers, and do sound check. Remainder time must be on stage or in actual performance space to run cables, and do sound and visual check. Zoning lasers and rehearsal must be done with no guests or extra personnel around. Longer time may be needed for larger arena type settings or difficult configurations.

Outdoor shows

• Act cannot be performed outside unless it is in a covered venue with a ceiling and with adequate flooring to perform on, such as dance floor or stage riser. Flooring must be as close to level and as smooth as possible with no obstacles sticking up which would trip or harm performers. Lasers cannot point into sky without FAA approval. A dome is available for rental to address these issues. We will need 12-15 sandbags to secure the dome.